مشکل گرافیک ATI radeon

[sajjads24]

انصافا دیگه این فدورا حالمو گرفته دلیل این خطا چیه که هی میاد :

این فدورا الان توی این خطا دقیقا چی میگه ؟

[hedayat]

میگه که ATI Catalyst Control Center که برنامه‌ی مدیریت تنظیمات کارت گرافیکی ATI هست کرش کرده. برنامه‌ی ATI کرش کرده تقصیر فدورا چیه؟! AMD باید نرم‌افزارش رو بهتر کنه (البته اگه براش مهم باشه). قبلا هم گفتم که فدورا خودش رو با برنامه‌ها و درایورهای باینری سازگار نمیکنه.

[sajjads24]

داداش واقعا دستت درد نکنه با اون اپدیت kmod که برای مشکل مالتی مدیا گفتی هم اون درست شد هم دیگه این پیام خطا نمیاد اخ که از فدورا ۱۲ تا ۱۹ حالا تونستم یک نفس راحت بکشم نمیدونی چقد با این گرافیک جنگ های تن به تن داشتم .

[hedayat]

به سلامتی.

[sajjads24]

سلام باز هم یک مشکل کوچیک با نصب درایور گرافیک ATI در فدروا 24 که بعد از نصب درایور گاهی وقتی فدروا در لودینگ گیر میکنه و این توشته ها میاد روی مانیتور :

دلیل این گیر کردن در لودینگ چطوری درست میشه ؟(گاهی وقتی اینطوری میشه !)

[hedayat]

نظری ندارم! ظاهرا باگی توی خود درایوره. یا توی تنظیم IRQها مشکلی داره.

[sajjads24]

هدایت جان درایور گرافیک رو بعد از دانلود از سایت http://www.ati.com به روش زیر پچ کردم توی فدورا 24 روی کرنل 4.6.6 بدون مشکل نصب شد و بازی oilrush رو اجرا کردم :(مشکل گیر کردن در لودینگ حل شد

کد: انتخاب همه

# fglrx-for-Fedora
Patches for the AMD fglrx proprietary video driver 15.302 for installing on Fedora 23, kernel versions 4.4.* and later

To install the proprietary fglrx driver for various Radeon/ATI/AMD video cards, the source must be patched. The patch has changed for the kernel 4.4.*, so the patch available at https://gist.githubusercontent.com/skarap/8843be76d286fd53835c/raw/a07d3608249bc7d95e3c9c12b4c402ebd2c9f21a/fglrx_kernel_4.3.diff is no longer quite enough. The fglrx_kernel_4.4.diff patch works through kernel 4.5.7-202. Starting with the kernel 4.6.4 on either fc23 or fc24, you will need fglrx_kernel_4.6.diff patch, as there are two more changes in the source.
The "4.4" patch here worked for 4.4.4 and up to kernel 4.5.7 kernels on my Fedora 23 64 bit machine with a R7 370 card. The "4.6" patch works on my Fedora 24 with 4.6.4-301, but should work on the 4.6.4 on Fedora 23, as the corresponding include files are the same between the two. I run KDE Plasma. I would suspect that the same process would work fine for a 32 bit machine as well, provided you download the 32 bit driver version.

Applying kernel updates often doesn't require rebuilding fglrx, but if the update changes any prerequisites, fglrx will stop working properly. Such was the case with 4.5.5-201 update, which refreshed mesa (libgl). Uninstall fglrx by going to /usr/share/ati and running, as root, amd-uninstall.sh, then rebuild and reinstall fglrx as described below. Many, many thanks to A.I. who pointed this out when the update broke my machine.

The rest of this README summarizes instructions from the excellent directions at https://bluehatrecord.wordpress.com/2016/03/25/installing-the-proprietary-amd-crimson-driver-on-fedora-23-with-linux-kernel-4-4-6-300 as modified by the discussion on the bottom.

- You must have the card installed for the driver install to work.
- Copy the version.h header file:  sudo cp /usr/include/linux/version.h /lib/modules/`uname -r`/build/include/linux/
- fglrx driver does not work  with the Xorg server versions beyond 1.17, so you must downgrade the server to Fedora 21 in the following two steps:
  - sudo dnf downgrade –-allowerasing –-releasever=21 xorg-x11-server-Xorg xorg-x11-server-common
  - original directions had downgrade to F22 and version 1.17, but F22 was upgraded to 1.18 and people report downgrading to version 1.16 on F21 works fine.
  - add the following line to your /etc/yum.repos.d/fedora* files: exclude=xorg-x11-server-Xorg xorg-x11-server-common
  - if the above doesn't work and you still upgrade the packages, just add the following line to your /etc/dnf/dnf.conf file: exclude=xorg-x11-server-Xorg xorg-x11-server-common
- download the driver zip from: http://support.amd.com/en-us/download/desktop?os=Linux+x86_64
- unzip the file to get fglrx-15.302 directory.
- change to the fglrx-15.302 directory and do: amd-driver-installer-15.302-x86.x86_64.run --extract
    this will make a fglr-install.<random string> directory.
- change to the install directory
- if your kernel is 4.4.4 or later, but before 4.6.4 patch the code by doing: patch -p1 < ../fglrx_kernel_4.4.diff
- if your kernel is 4.6.4 or later, patch the code by doing: patch -p1 < ../fglrx_kernel_4.6.diff
- You are now ready to install the driver. The build and install must be doen as root, reportedly "sudo" is not enough. As root, change to the install directory.
- run: ./ati-installer.sh 15.302 --install
- when you get the install window, select the second option: "Install driver 15.302 on X.Org 6.9 or later 64-bit"
- accept the defaults and let it install
- skip reboot when it asks at the end (no problem if you reboot, it just takes little longer)
- when it comes back, as root, run: aticonfig --initial
- reboot
- you "should" be good to go! But, if you're like me, it will take a week before you get it all figured out!


اینم فایل پچ برای کرنل های 4.6 و 4.4 که بدون مشکل جواب میده :
http://s7.picofile.com/file/8266414676/fglrx_for_Fedora_master.zip.html
دوستان اگه سوالی یا مشکلی داشتید همینجا اعلام کنید .

موفق باشد.

[hedayat]

به سلامتی. ممنون که راه حل رو گذاشتید برای بقیه.

[sajjads24]

سلام با توجه به اینکه چند ماهی از انتشار فدورا ۲۵ میگذره و بسیاری از کاربران سیستم خودشون رو به فدورا ۲۵ اپدیت کردن برای نصب درایور ATI/AMD در فدورا ۲۵ با کرنل ۴.۹ طبق اموزش زیر نصب کنید :

کد: انتخاب همه

- You must have the card installed for the driver install to work.
- Copy the version.h header file:  sudo cp /usr/include/linux/version.h /lib/modules/`uname -r`/build/include/linux/
- fglrx driver does not work  with the Xorg server versions beyond 1.17, so you must downgrade the server to Fedora 21 in the following two steps:
  - sudo dnf downgrade –-allowerasing –-releasever=21 xorg-x11-server-Xorg xorg-x11-server-common
  - original directions had downgrade to F22 and version 1.17, but F22 was upgraded to 1.18 and people report downgrading to version 1.16 on F21 works fine.
  - add the following line to your /etc/yum.repos.d/fedora* files: exclude=xorg-x11-server-Xorg xorg-x11-server-common
  - if the above doesn't work and you still upgrade the packages, just add the following line to your /etc/dnf/dnf.conf file: exclude=xorg-x11-server-Xorg xorg-x11-server-common
- download the driver zip from: http://support.amd.com/en-us/download/desktop?os=Linux+x86_64
- unzip the file to get fglrx-15.302 directory.
- download all the files from this repository's master branch to the fglrx-15.302 directory.
- change to the fglrx-15.302 directory and do: amd-driver-installer-15.302-x86.x86_64.run --extract
    this will make a fglr-install.<random string> directory.
- change to the install directory
- if your kernel is 4.4.4 or later, but before 4.6.4 patch the code by doing: patch -p1 < ../fglrx_kernel_4.4.diff
- if your kernel is 4.6.4 or later, patch the code by doing: patch -p1 < ../fglrx_kernel_4.6.diff
- if your kernel is 4.7.2 or later, patch the code by doing: patch -p1 < ../fglrx_kernel_4.7.diff
- if your kernel is 4.9 or later, patch the code by doing: patch -p1 < ../fglrx_kernel_4.9.diff
- You are now ready to install the driver. The build and install must be done as root, reportedly "sudo" is not enough. As root, change to the install directory.
- run: ./ati-installer.sh 15.302 --install
- when you get the install window, select the second option: "Install driver 15.302 on X.Org 6.9 or later 64-bit"
- accept the defaults and let it install
- skip reboot when it asks at the end (no problem if you reboot, it just takes little longer)
- when it comes back, as root, run: aticonfig --initial
- reboot
- you "should" be good to go! But, if you're like me, it will take a week before you get it all figured out!

برای دانلود پچ برای کرنل ۴.۹ به این لینک مراجعه کنید :
http://s6.picofile.com/file/8285514284/fglrx_for_Fedora_master.zip.html
موفق باشید.